Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Liner & Rebuild Across Farmington
A stainless steel chimney liner in Farmington typically runs $2,200 to $4,800 installed, and a partial rebuild of the upper stack courses starts around $1,600. Most liner jobs in town take one full day. If you’re reading this because an aging flue has you worried, call (860) 743-7743 and Wendell himself will likely pick up.
The older homes in Farmington aren’t like the newer builds on the town’s outer roads. They come with center-chimney stacks, undocumented flues, and mortar that’s been patched across three centuries by different hands using different materials. That’s not a problem you fix with a phone quote. It needs eyes on it, and a camera you can see for yourself. We’ve worked these stacks long enough to know what we’re looking at before we even pull the ladder off the truck. More on our Chimney Liner & Rebuild process below.
Why Top Hat Chimney Is Farmington’s Preferred Chimney Liner & Rebuild Company
Wendell Pike started Top Hat Chimney in 1999, and he’s put his name on every job since. Not a franchise that rotated in last spring. A local name you’ll run into again on Saturday at the hardware store. When Farmington homeowners ask around about Chimney Repair - Farmington, they hear the same thing: call Wendell.
We publish our address and license number. We answer the phone around the clock, no voicemail maze. The sweep who shows up at your door in Farmington is background-checked, uniformed, and works directly under Wendell. Every completed job carries the 90-Day Done Right Promise in writing. If it’s not right, one call brings the crew back at no charge.
Farmington presents a particular kind of chimney work, and we know it. The historic district alone has some of the densest pre-Revolutionary housing stock in Connecticut. The chimneys in those homes were built before liners existed, before gas appliances, before anyone thought to keep records of which flue served our Fireplace Services in Farmington. That’s the work we do most often, and it’s the work national chains struggle with. Ask anyone on your street.
Our Chimney Liner & Rebuild Services in Farmington
Stainless Steel Liner
The most common fix we do in Farmington is sleeving an old, unlined flue with a stainless steel liner. DuraFlex and Copperfield are the brands we trust and stock. In a historic home, stainless gives you a continuous, sealed passage from the appliance to the cap. No more eroded mortar joints letting flue gas into the wall cavities. It’s the right fix when the original clay tiles have cracked or separated, which we see regularly in stacks that have been through decades of Farmington freeze-thaw cycles.

Flexible Liner
When a Farmington flue offsets or corbels inside the stack, a rigid liner can’t navigate the turns. That’s where flexible stainless earns its keep. The Farmington River corridor’s moisture makes flue walls swell and shift, and we’ve pulled flexible liner through stacks where rigid would have required dismantling masonry. HeatShield is our go-to when the existing flue is structurally sound but needs a seamless internal coating instead of a liner.

Liner Replacement
Some Farmington homeowners have liners installed twenty or thirty years ago, back when aluminum was common for gas flues. Those don’t hold up forever, especially with the moisture this town sees. We replace failed liners, and before we recommend replacement, we run the camera. You’ll see the footage yourself. If the liner can be repaired, we say so. If it needs replacement, you’ll know exactly why.

Partial Rebuild
A partial rebuild means we take down the upper courses of a stack that have spalled or separated and reconstruct them properly. In Farmington, this usually means the top 3 to 5 feet of brick above the roofline, where exposure is harshest. We match mortar to the age and profile of the original. The worst thing you can do to an old Farmington chimney is repoint it with hard Portland cement. It traps moisture behind the joint lines and pops the brick faces off in winter. We see it constantly on Main Street colonials. A partial rebuild fixes it right, and on stacks visible from the street, we’ll tell you early whether the Historic District Commission may need to review the work.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Farmington
We install and service liners from DuraFlex, Copperfield, HeatShield, and Gelco. These aren’t brands we picked from a catalog. They’re what we’ve found hold up in Connecticut’s climate after decades of freeze-thaw and river-moisture exposure. When you’re in Farmington and your liner is measured, we know the exact specs before we order. No back-and-forth delays. If the brand you have isn’t one we stock, we’ll tell you what it is and what the honest options are. Our Farmington customers get straight answers, not a shelf of labels.
Common Chimney Liner & Rebuild Problems We See in Farmington Homes
- Historic mortar repointed with hard Portland cement. On Main Street and High Street colonials, previous “repairs” used mortar that’s too rigid, so freeze-thaw cycles in Farmington cause spalling brick faces that eventually force a partial rebuild of the upper stack. A camera won’t show this; eyes on the brick will.
- Multi-flue center chimneys with undocumented capped flues. A renovation in an old Farmington home often leaves no record of which flue serves which appliance. We’ve found active appliances venting into flues that were never relined for modern gas, and third-degree creosote hiding in a flue that everyone assumed was dormant.
- Moisture-driven crown cracking near the Farmington River. The river corridor’s ambient moisture accelerates efflorescence and crown cracking on mid-century ranches, and if a cracked crown is left unaddressed, water tracks down the flue liner and rusts out the firebox damper.
- Failed aluminum gas liners in homes converted from oil. Farmington has plenty of homes that switched fuel types over the decades, and older aluminum liners corrode. The fix is usually stainless, but not always. That’s what the camera decides.
Pricing for Chimney Liner & Rebuild in Farmington, CT
Here’s what we typically see in Farmington, CT. A straightforward stainless liner installation runs $2,200 to $4,800 depending on flue height, access, and whether scaffolding is needed on a steep pitch. Liner replacement with removal of the old liner usually adds $400 to $700. A partial rebuild of the upper stack starts at $1,600 and can reach $3,500 if additional courses or crown work are involved. A full chimney rebuild is uncommon in Farmington, but when it’s needed it starts around $6,000 and goes up from there. You’ll get a flat price before work begins. The number you hear on the phone is the number on the invoice. Call (860) 743-7743 for a free estimate, and remember: $40 off any repair over $200, 10% off for seniors and veterans, and a free second opinion on any competing written estimate.
We Also Serve Cities Near Farmington
Top Hat Chimney handles Chimney Liner & Rebuild in Farmington and the surrounding towns, including Hartford, West Hartford, Simsbury, and Newington. If you’re just outside Farmington, call (860) 743-7743 and we’ll tell you straight whether you’re in our local service county. No trip charge inside the county.
Serving Farmington, CT - Our Local Coverage Area
We’re based in the Farmington area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Liner & Rebuild in Farmington
We run a camera down each flue, one at a time, and you watch the footage with us. In a Farmington colonial, we’re often looking for disconnected liners, third-degree creosote hiding in a capped flue, or an active appliance venting into a flue never relined for modern gas. We don’t recommend a liner without camera evidence you can see for yourself. Call (860) 743-7743 and we’ll schedule the inspection.
If your stack is visible from the street and falls within Farmington’s National Register Historic District, exterior work may require review by the Historic District Commission. We can tell you early whether your project likely needs that step, and we’ll document the existing structure with photos before any brick moves. Call (860) 743-7743 and we’ll talk you through what your specific property triggers.
That white flaking is efflorescence, and near the Farmington River it’s often tied to excess moisture migrating through the masonry. It can be a sign of a failing crown or deteriorated flue liner letting water into the structure. It’s not cosmetic. Get our Chimney Cap & Crown in Farmington checked before the rust reaches your damper. Call (860) 743-7743 for an inspection.
You can absolutely reline one flue and leave others alone, as long as the others aren’t in active use or showing damage. We’ll never push you to reline a dormant flue that’s structurally sound. The camera tells us which flues need attention, and we’ll show you why. That’s the standard. Call (860) 743-7743 for a no-pressure assessment.
If the existing flue is structurally sound, a HeatShield coating may be the right fix and it costs less than a full stainless liner. If the clay tiles are cracked, separated, or missing, a stainless liner is the answer. The camera determines which path you take, and you’ll see the footage before anyone recommends anything. Call (860) 743-7743 and we’ll get you on the schedule.
Call Wendell’s Crew for Chimney Liner & Rebuild in Farmington
If you’ve got a center-chimney colonial on Main Street, a mid-century ranch near the river, or anything in between, we’ll give you the honest word. No camera, no recommendation. No upsell on a flue you can’t see. Call (860) 743-7743 for a free estimate, and ask for Wendell. He’ll likely pick up himself.
Written by Wendell Pike, Owner at Top Hat Chimney, serving Farmington since 1999.





Before
After
Before
After
Before
After